Bitsrapid

Friday, November 23, 2018

LOAD BALANCING 10 MODEM


                  LOAD BALANCING 10 MODEM

ok gaes kali ini saya akan sharing load balancing pcc 10 modem ya gaes.untuk atasi galau FUP Indihome hehe semoga bermanfaat ya gaes

Tuesday, June 7, 2016



        SCRIP LOAD BALANCE NTH+PCC

 /ip firewall address-list
add address=192.168.0.0/16 list=rfc1918
add address=172.16.0.0/12 list=rfc1918
add address=10.0.0.0/8 list=rfc1918


ni manggle nya
/ip firewall mangle
add action=mark-connection chain=prerouting comment="in/out for each wan\
" connection-mark=no-mark in-interface=pppoe-out1 \
new-connection-mark=cm_in_isp1
add action=mark-connection chain=prerouting connection-mark=no-mark \
in-interface=pppoe-out2 new-connection-mark=cm_in_isp2
add action=mark-routing chain=output connection-mark=cm_in_isp1 \
new-routing-mark=via_pppoe1
add action=mark-routing chain=output connection-mark=cm_in_isp2 \
new-routing-mark=via_pppoe2
add action=jump chain=prerouting comment="lb nth jumper for tcp 80 traffic" \
connection-state=new dst-address-list=!rfc1918 dst-port=80 in-interface=\
all-ethernet jump-target=nth-balancer protocol=tcp
add action=mark-connection chain=nth-balancer comment=\
"lb nth balancer classifier" in-interface=ether2 new-connection-mark=\
cm_nth_balancer_1 nth=2,1
add action=mark-connection chain=nth-balancer in-interface=ether2 \
new-connection-mark=cm_nth_balancer_2 nth=2,2
add action=return chain=nth-balancer in-interface=ether2
add action=mark-routing chain=prerouting comment="lb nth route" \
connection-mark=cm_nth_balancer_1 in-interface=ether2 new-routing-mark=\
via_pppoe1 passthrough=no
add action=mark-routing chain=prerouting connection-mark=cm_nth_balancer_2 \
in-interface=ether2 new-routing-mark=via_pppoe2 passthrough=no
add action=jump chain=prerouting comment="lb pcc jumper for any trafik" \
dst-address-list=!rfc1918 in-interface=ether2 jump-target=pcc-balancer \
protocol=!ospf
add action=jump chain=prerouting dst-address-list=!rfc1918 in-interface=ether2 \
jump-target=pcc-balancer protocol=tcp
add action=jump chain=prerouting dst-address-list=!rfc1918 in-interface=ether2 \
jump-target=pcc-balancer protocol=udp
add action=mark-connection chain=pcc-balancer comment=\
"lb pcc balancer classifier" in-interface=ether2 new-connection-mark=\
cm_pcc_balancer_1 per-connection-classifier=dst-address-and-port:2/0
add action=mark-connection chain=pcc-balancer in-interface=ether2 \
new-connection-mark=cm_pcc_balancer_2 per-connection-classifier=\
dst-address-and-port:2/1
add action=return chain=pcc-balancer in-interface=ether2
add action=mark-routing chain=prerouting comment="lb pcc route" \
connection-mark=cm_pcc_balancer_1 in-interface=ether2 new-routing-mark=\
via_pppoe1 passthrough=no
add action=mark-routing chain=prerouting connection-mark=cm_pcc_balancer_2 \
in-interface=ether2 new-routing-mark=via_pppoe2 passthrough=no


lanjut di route
/ip route
add check-gateway=ping distance=1 gateway=pppoe-out1 routing-mark=via_pppoe1
add check-gateway=ping distance=1 gateway=pppoe-out2 routing-mark=via_pppoe2
add distance=1 gateway=pppoe-out1
add distance=2 gateway=pppoe-out2